General purpose, diazo sensitized emulsion. FX-88 expose in about half the time of normal diazo-sensitized emulsions. It produce tough stencils with good resolution and edge definition and can be reclaimed easily. FX-88 is blue, and has good solvent resistance. It can be used with solvent-based poster or enamel inks.
DLX is formulated to reduce the acrylate odor and eliminate the surface oiliness that are characteristic of most dual-cure emulsions, especially under hot and humid conditions. As a result, positives are less likely to stick to the emulsion surface. Because of its high solids content, DLX dries rapidly. It is a brilliant blue color, so stencils are easy to inspect on white or colored fabric.
LX-660 is a versatile and durable diazo-photopolymer (dual-cure) emulsion with superior resistance to water-based ink systems, as well as many solvent- based inks. It is suitable for virtually all general purpose graphics and industrial applications. LX-660 is red. Excellent humidity resitance. Also available as blue version (LX 660 Blue).
LX-892 is used for the production of high-quality, water and solvent resistant screens for ceramics direct and textile printing stencils. The print run resistance can considerably be increased by chemical hardening with ULANO HARDENER. Before hardening, LX-892 is decoatable with ULANO Chemical Line products. Blue colour. LX-892 also available in Violet color.
Proclaim is a diazo sensitized, high quality, all-purpose dual-cure emulsion with total resistance to all solvent based and UV inks. It is very suitable for high quality graphics and industrial printing and for all general purpose, graphic and industrial applications. Resolution and edge definition are excellent, which makes it ideal for fine line and half tone printing. Proclaim is green coloured and very easy to reclaim.
Proclaim HR is a high resolution diazo-photopolymer (dual-cure) emulsion formulated to provide unequalled exposure latitude and ease of decoating, even if underexposed and used with aggressive inks and washup solvents. Proclaim HR is multi-purpose, fast exposing, and provides good acutance. Its high solids content provides good stencil build per coat, excellent mesh bridging, and fast drying. Proclaim HR is very suitable for demanding graphics, electronics, and industrial applications.
Multi-purpose diazo/acrylic photopolymer screen emulsion. RLX has broad exposure latitude, superior edge definition and resolution, and resistance to a wide variety of solvent- and water-based ink systems. RLX also possesses excellent coating properties, mesh bridging, stencil build per coat, drying speed, and durability. It has a high-contrast magenta color with superior resistance to humidity.
Blue is a ready-to-use, extremely-fast-exposing SBQ-photopolymer direct emulsion formulated for imprinted sportswear printing. It resists plastisol inks—including newer, more aggressive, post-phthalate plastisols—and most washup solvents, making it exceptionally easy to reclaim in automatic equipment or by hand. It is formulated with a “masking color” that reduces light scattering - the major cause of loss of resolution. Blue is especially efficient with fixed or scanning LED units, as well as with fluorescent tubes or other low intensity light sources, or in shops that need high stencil making throughput. Blue stencils are durable, will not become tacky under high humidity conditions, have excellent wet strength, and are easy to wash out.
Very fast, pure photopolymer screen emulsion for flat engraving with DMD Computer-to-Screen exposure systems. Intended for high resolution graphic or industrial screen printing with solvent based or UV-inks for the production of general large-format work, such as posters, outdoor advertising, and other large-scale applications. The very fast exposure speed of CT Fast makes it ideal for pixel exposures - and, in turn, allows faster throughput, as well as savings on expensive CTS bulbs. CTS Fast available in Red and Blue colour.
Orange is a ready-to-use, ultra-fast exposing SBQ-photopolymer direct emulsion formulated for imprinted sportswear printing. Its high solids content and viscosity improves control when coating screens by hand and makes Orange a good choice for coarse mesh. The orange color of Orange “masks” halation and light scattering significantly, thereby improving resolution. With orange, one does not require more expensive dyed mesh. Orange resists plastisols, most washup solvents, and some water-based inks.
Platinum is a ready-to-use, SBQ-photopolymer direct emulsion for textile /imprinted sportswear printing with plastisol and water-based inks. Platinum is formulated for compatibility with CTS (computer-to-screen) exposure, and automated washout and reclaiming equipment. Its high viscosity and solids content provides good coating control, even on coarse mesh. Platinum is violet in color, providing high color contrast for easy stencil inspection.
QFX is a ready-to-use, fast-exposing SBQ-photopolymer direct emulsion formulated for industrial and fine halftone graphics printing. It has superb resolution and a high solids content for the production of stencils with exceptional edge definition and resolution. QFX resists most solvent-based inks. Stencils made with QFX are extremely durable, yet can be reclaimed easily. QFX available in Red (magenta) and Blue.
QLT is a high-resolution, ready-to-use, fast-exposing SBQ-photopolymer emulsion formulated for imprinted sportswear printing. Its high viscosity provides good coating control and its high solids content results in better mesh bridging on coarse mesh, and fast drying. Its high contrast blue color affords easy stencil inspection. QLT is resistant to plastisol inks and most washup solvents, making it easy to reclaim in automatic stencil removal equipment or by hand. Stencils made with QLT are extremely durable and will not become tacky under high humidity conditions. QLT is formulated to reduce stencil-making time (coating, drying, and exposure) in shops with high stencil throughput. Its fast exposure speed will also be of interest to low volume printers with weak light sources. To increase the water resistance, an optional diazo is available.
QT-Discharge is specially formulated to resist discharge inks, and is compatible with water-based and plastisol inks, too. It has a high solids content and viscosity, providing good stencil build per coat, excellent mesh bridging of coarse mesh, and fast drying. QT-Discharge red in color for easy stencil inspection, is supplied with diazo powder.
A red coloured, presensitized, extremely high viscosity emulsion for high density printing and other thick ink applications using plastisols, water-based or mild solvent inks. It's very high solids content is ideal for ultra-thick ink deposits. Even very thick, QT-Thix stencils hold print details very well. QT-Thix is easy to reclaim.
QTX is a red coloured, ready-to-use, ultra-fast exposing SBQ photopolymer direct emulsion formulated for imprinted sportswear applications. It's high solids content provides superior coating properties, better bridging of coarse mesh, and fast drying. QTX is designed for plastisol inks, is extremely durable and reclaims easily.
QX 3 combines the properties of a dual cure with the advantages and speed of an SBQ. QX 3 is a very versatile product. It is a fast, ready to use direct emulsion for graphic and industrial screen printing with solvent, UV-conv. and UV-water based inks with a high resolution (up to 52 L/cm or 60 micron lines). QX 3 offers also a good mechanical resistance which makes it suitable for glass printing as well. QX 3 is blue coloured.
QX 5 Red/Blue is a universal, ready-to-use, ultra-fast-exposing SBQ-photopolymer direct emulsion. Its high viscosity provides good coating control. Its high solids content results in better mesh bridging on coarse mesh, and fast drying. QX 5 Red/Blue is resistant to plastisol inks, most washup solvents, and some water-based inks, making it easy to reclaim in automatic stencil removal equipment or by hand. Stencils made with QX 5 Red/Blue are extremely durable and will not become tacky under high humidity conditions. QX 5 Red/Blue is formulated to reduce stencil-making time in shops with high stencil throughput. Its fast exposure speed will also be of interest to low volume printers with weak light sources.
QX 6 is a universal SBQ-dual cure emulsion with superior resolution for industrial graphics and electronics printing (PCB and conductive traces), compatible with UV and virtually all solvent-based inks. QX 6 is formulated for sensitivity to UV and near-UV-visible blue light, by means of UV-LED- and laser-based CTS-exposure. It can be also exposed with traditional metal halide light sources. QX 6 features very fast exposure speed, while offering excellent exposure latitude. It prvides non-tacky surfaces, high humidity resistance, and good durability with easy reclamation. It features excellent resolution, good edge definition, and a very good wet strength. By using special optimized sensitizers and given its light blue color, QX 6 facilitates excellent exposure light penetration, ensures thorough curing, eliminating or reducing latent haze on the mesh after decoating. Solids: 35%, Viscosity: 5.200 mPas.
ULANO QX 7 is a solvent resistant, one-component photopolymer emulsion. It is used for the production of high-quality, solvent resistant stencils. High resolution and excellent mesh bridging
make it suitable for printing finest half-tones, lettering and designs (circuit boards, ceramic decals, bar-codes). Viscosity: approx. 5.000 mPas.
QXO is a ready-to-use, extremely-fast-exposing SBQ-photopolymer direct emulsion formulated for imprinted sportswear printing. It resists plastisol inks—including newer, more aggressive, post-phthalate plastisols—and most washup solvents, making it exceptionally easy to reclaim in automatic equipment or by hand. It is formulated with a “masking color” that reduces light scattering - the major cause of loss of resolution. QXO is especially efficient with fixed or scanning LED units, as well as with fluorescent tubes or other low intensity light sources, or in shops that need high stencil making throughput. BLUE stencils are durable, will not become tacky under high humidity conditions, have excellent wet strength, and are easy to wash out.
Proclaim EC, using RD Sensitizing Technology is a diazo-free, ready-to-use dual-cure emulsion. It does not require the mixing of a diazo powder with water, the stirring of diazo solution into the emulsion, or any waiting time for de-bubbling. Proclaim EC is formulated to provide unequalled exposure latitude and ease of decoating, even if underexposed and used with aggressive inks and solvents. It combines the convenience of a "ready-to-use" emulsion with the great durability and superb image properties of a dual-cure emulsion. It is resistant to all solvent-based inks, as well as water-based UV-cured inks. Proclaim EC is ideal for general graphics, textile, and industrial applications. Proclaim EC is green coloured.